From Gas Consultants' beginnings we were focused on gas
appliance product testing. Our original focus was on
pretesting gas appliances to the ANSI Z21 and Z83
standards for gas appliances. When manufacturers would
encounter issues of not complying with a test specification,
we offered engineering design services to work with the
manufacturer and the  testing agency to correct the
problem(s). Today, in the area of gas burning equipment,
we are a third party test facility for UL (D.A.P. program) and
in the new RTL Program  (Recognized Testing Laboratory)
of Intertek (ITS/ETL) along with our ongoing relationship with
CSA as a certified lab.  To facilitate these relationships,
GCI operates in compliance with ISO 17025 and is audited
once a year by each above agencies (3 audits a year) to
ensure the quality of our testing operations.
While specializing in ANSI Z21 and Z83 standards for gas
appliances, we have expanded to include other gas
standards such as UL and CE, along with designing and
testing some electric and oil products. We are a
recognized NOx testing lab for compliance to SCAQMD
NOx regulations along with California Energy Commission
(CEC) testing.  We also work on dedicated gas research
and development programs for OEMs and the appliance
industry through groups such as ASHRAE, AHRI
(GAMA), SCAQMD, American Gas Association, etc.
Gas Consultants, Inc.
7590 Independence Drive
Walton Hills,  OH  44146
Phone:  440-232-3200    Fax:  440-232-1834

Product Research & Certification Testing

Certification &
Research Testing
Our testing and research capabilities include:
Working with national test agencies
(UL, CSA, ETL) to certify products to
ANSI standards
SCAQMD certified test facility for NOx
emmissions
CE testing for Europe, working
primarily with BSI (formally Advantica)
DOE and CEC testing for efficiency
Specialized testing for appliance
compatibility when operating on LNG
and special LP mixtures
ASHRAE research testing to
determine high alititude on hydronic
heating appliances
Customized Product Evaluations and
Testing under controlled conditions for
manufacturers or major retailers
Our equipment list includes:
2 gas chromatographs
2 wind machines with outlets starting at 4'
x 4', and able to achieve the ANSI specified
31 and 40 mph test criteria
AMCA style air capacity tunnel
Chemiluminescent NOx analyzers
6 Siemens infrared CO, CO2 & O2
analyzers
Dry gas meters & wet gas meters
Data logging equipment to continuously
record data
Various hand held temperature and volt
meters
Sealed 1,000 cubic foot room for
environmental testing & oxygen depleting
testing
Controlled temperature chambers for gas
component testing
50/60 cycle hertz generator
All testing operations are in accordance
with the guidelines of ISO 17025
And much more....
Content copyright 2010. Gas Consultants, Inc. All rights reserved.
7590 Independence Drive, Walton Hills, Ohio 44146